Package: tcpd
Status: install ok unpacked
Priority: important
Section: base
Installed-Size: 200
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: hurd-i386
Source: tcp-wrappers
Version: 7.6.dbs-8
Replaces: libwrap0 (<< 7.6-8)
Depends: libc0.3 (>= 2.3.2.ds1-4), libwrap0 (>= 7.6-1.1), debconf (>= 0.5) | debconf-2.0
Conflicts: netbase (<< 3.16-1)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: libtext-wrapi18n-perl
Status: install ok unpacked
Priority: important
Section: perl
Installed-Size: 76
Maintainer: Tomohiro KUBOTA <kubota@debian.org>
Architecture: all
Version: 0.06-1
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().

Package: debconf
Status: install ok unpacked
Priority: important
Section: admin
Installed-Size: 1364
Maintainer: Joey Hess <joeyh@debian.org>
Architecture: all
Version: 1.4.49
Replaces: debconf-tiny
Provides: debconf-2.0
Depends: debconf-i18n | debconf-english
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1)
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgnome2-perl, libqt-perl, libnet-ldap-perl, perl
Conflicts: cdebconf, debconf-tiny, apt (<< 0.3.12.1), menu (<= 2.1.3-1), dialog (<< 0.9b-20020814-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13), debconf-utils (<< 1.3.22)
Conffiles:
 /etc/debconf.conf newconffile
 /etc/apt/apt.conf.d/70debconf newconffile
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: coreutils
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 7672
Maintainer: Michael Stone <mstone@debian.org>
Architecture: hurd-i386
Version: 5.2.1-2+hurd.1
Replaces: textutils, shellutils, fileutils, stat, debianutils (<= 2.3.1)
Provides: textutils, shellutils, fileutils
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: stat
Description: The GNU core utilities
 This package contains the essential basic system utilities.
 .
 Specifically, this package includes:
 basename cat chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir
 dircolors dirname du echo env expand expr factor false fmt fold groups head
 hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mv nice nl
 nohup od paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir
 sha1sum seq shred sleep sort split stat stty sum sync tac tail tee test touch
 tr true tsort tty uname unexpand uniq unlink users vdir wc who whoami yes

Package: debianutils
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 208
Maintainer: Clint Adams <schizo@debian.org>
Architecture: hurd-i386
Version: 2.13.2
Replaces: miscutils, cron (<= 3.0pl1-31), tetex-bin (<< 1.0.6-1.1), manpages-fr (<= 0.9.3-1)
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4), coreutils (>= 4.5.8-1)
Conflicts: manpages-fr (<= 0.9.3-1)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are: installkernel mkboot mktemp
 run-parts savelog sensible-browser sensible-editor sensible-pager
 tempfile which.

Package: gettext-base
Status: install ok unpacked
Priority: standard
Section: base
Installed-Size: 872
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: hurd-i386
Source: gettext
Version: 0.14.4-1
Replaces: gettext (<= 0.12.1-1)
Provides: libasprintf0, libgettextpo0
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.

Package: libgdbm3
Status: install ok unpacked
Priority: standard
Section: base
Installed-Size: 72
Maintainer: James Troup <james@nocrew.org>
Architecture: hurd-i386
Source: gdbm
Version: 1.8.3-2
Depends: libc0.3 (>= 2.3.1-1)
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).

Package: inetutils-inetd
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 136
Maintainer: Jeff Bailey <jbailey@nisa.net>
Architecture: hurd-i386
Source: inetutils
Version: 2:1.4.2+20040207-4
Provides: inetd, netkit-inetd
Depends: libc0.3 (>= 2.3.2.ds1-4), zlib1g (>= 1:1.2.1), netbase, inetutils-syslogd | system-log-daemon
Conflicts: inetd, netkit-inetd
Conffiles:
 /etc/init.d/inetutils-inetd newconffile
Description: Internet super server
 Inetd is the daemon that listens on various TCP and UDP ports and spawns
 programs that can't or won't do it for themselves.

Package: slang1
Status: install ok unpacked
Priority: standard
Section: base
Installed-Size: 560
Maintainer: Jim Mintha <jmintha@debian.org>
Architecture: hurd-i386
Source: slang
Version: 1.4.9dbs-8
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: The S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.

Package: libuuid1
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 100
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hurd-i386
Source: e2fsprogs
Version: 1.37-2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's),
 using a standard which is blessed by both Microsoft and DCE, and is
 being proposed as an internet standard.  See the internet-draft:
 .
                draft-leach-uuids-guids-01.txt
 .
 for more information.

Package: ncurses-base
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 292
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Architecture: all
Source: ncurses
Version: 5.4-4
Replaces: ncurses-term
Provides: ncurses-runtime
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/E/Eterm newconffile
 /etc/terminfo/E/Eterm-color newconffile
 /etc/terminfo/a/ansi newconffile
 /etc/terminfo/c/cons25 newconffile
 /etc/terminfo/c/cygwin newconffile
 /etc/terminfo/d/dumb newconffile
 /etc/terminfo/h/hurd newconffile
 /etc/terminfo/l/linux newconffile
 /etc/terminfo/m/mach newconffile
 /etc/terminfo/m/mach-bold newconffile
 /etc/terminfo/m/mach-color newconffile
 /etc/terminfo/p/pcansi newconffile
 /etc/terminfo/r/rxvt newconffile
 /etc/terminfo/r/rxvt-basic newconffile
 /etc/terminfo/r/rxvt-m newconffile
 /etc/terminfo/s/screen newconffile
 /etc/terminfo/s/screen-bce newconffile
 /etc/terminfo/s/screen-s newconffile
 /etc/terminfo/s/screen-w newconffile
 /etc/terminfo/s/sun newconffile
 /etc/terminfo/v/vt100 newconffile
 /etc/terminfo/v/vt102 newconffile
 /etc/terminfo/v/vt220 newconffile
 /etc/terminfo/v/vt52 newconffile
 /etc/terminfo/w/wsvt25 newconffile
 /etc/terminfo/w/wsvt25m newconffile
 /etc/terminfo/x/xterm newconffile
 /etc/terminfo/x/xterm-debian newconffile
 /etc/terminfo/x/xterm-r5 newconffile
 /etc/terminfo/x/xterm-r6 newconffile
 /etc/terminfo/x/xterm-xfree86 newconffile
 /etc/terminfo/x/xterm-mono newconffile
 /etc/terminfo/x/xterm-vt220 newconffile
 /etc/terminfo/x/xterm-color newconffile
Description: Descriptions of common terminal types
 This package contains what should be a reasonable subset of terminal
 definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100,
 vt102, vt220, vt52, and xterm.

Package: libpopt0
Status: install ok unpacked
Priority: important
Section: base
Installed-Size: 436
Maintainer: Paul Martin <pm@debian.org>
Architecture: hurd-i386
Source: popt
Version: 1.7-5
Replaces: popt
Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: popt, libpopt-dev (<= 1.4-1), rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.

Package: libpam0g
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 168
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: hurd-i386
Source: pam
Version: 0.76-22
Replaces: libpam0g-util
Depends: libc0.3 (>= 2.3.2.ds1-4), libpam-runtime
Suggests: libpam-doc
Conflicts: libpam0 (<= 0.56-2), libpam
Description: Pluggable Authentication Modules library
 Contains the C shared library for Linux-PAM, a suite of shared
 libraries that enable the local system administrator to choose how
 applications authenticate users.  In other words, without rewriting
 or recompiling a PAM-aware application, it is possible to switch
 between the authentication mechanism(s) it uses.  One may entirely
 upgrade the local authentication system without touching the
 applications themselves.

Package: inetutils-ftp
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 160
Maintainer: Jeff Bailey <jbailey@nisa.net>
Architecture: hurd-i386
Source: inetutils
Version: 2:1.4.2+20040207-4
Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), libreadline4 (>= 4.3-1), zlib1g (>= 1:1.2.1), netbase
Description: File Transfer Protocol client
 The ftp command is used to transfer files between hosts using the
 FTP protocol.

Package: perl-modules
Status: install ok unpacked
Priority: standard
Section: perl
Installed-Size: 10716
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: all
Source: perl
Version: 5.8.4-8
Replaces: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl, liblocale-codes-perl
Provides: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl, liblocale-codes-perl
Depends: perl (>= 5.8.4-1)
Conflicts: libpod-parser-perl (<< 1.14-1), libansicolor-perl (<< 1.08-1), libfile-temp-perl (<< 0.14-1), libnet-perl (<< 1:1.17-1), libattribute-handlers-perl (<< 0.78-1), libcgi-pm-perl (<< 3.04-1), libi18n-langtags-perl (<< 0.29-1), liblocale-maketext-perl (<< 1.08-1), libmath-bigint-perl (<< 1.70-1), libnet-ping-perl (<< 2.31-1), libtest-harness-perl (<< 2.40-1), libtest-simple-perl (<< 0.47-1), liblocale-codes-perl (<< 2.06.1-1)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.

Package: bsdutils
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 156
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: hurd-i386
Source: util-linux (2.12-3)
Version: 1:2.12-3
Pre-Depends: libc0.3 (>= 2.3.1-1)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system.  You should probably also install
 bsdmainutils to get the remaining standard BSD utilities.
 .
 Included are: logger, renice, replay, script, wall

Package: dpkg-dev
Status: install ok unpacked
Priority: standard
Section: utils
Installed-Size: 552
Origin: debian
Maintainer: Dpkg Development <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: all
Source: dpkg
Version: 1.10.27
Replaces: dpkgname, dpkg (<< 1.4.1.8), dpkg-doc-ja
Depends: perl5, perl-modules, cpio (>= 2.4.2-2), patch (>= 2.2-1), make, binutils
Recommends: c-compiler
Suggests: gnupg, debian-keyring
Conflicts: dpkgname
Conffiles:
 /etc/dpkg/shlibs.default newconffile
 /etc/dpkg/shlibs.override newconffile
Description: Package building tools for Debian
 This package contains the tools (including dpkg-source) required to
 unpack, build and upload Debian source packages.
 .
 Most Debian source packages will require additional tools to build -
 for example, most packages need the `make' and the C compiler `gcc'.

Package: inetutils-talk
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 108
Maintainer: Jeff Bailey <jbailey@nisa.net>
Architecture: hurd-i386
Source: inetutils
Version: 2:1.4.2+20040207-4
Replaces: talk-hurd
Provides: talk
Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), zlib1g (>= 1:1.2.1), netbase
Description: Talk to another user
 Talk is a visual communication program which copies lines from your terminal
 to that of another user.

Package: ncurses-bin
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 456
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Architecture: hurd-i386
Source: ncurses
Version: 5.4-4
Provides: tput
Pre-Depends: libc0.3 (>= 2.3.1-1), libncurses5 (>= 5.4-1)
Conflicts: ncurses, tput
Description: Terminal-related programs and man pages
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.

Package: perl-base
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 2084
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: hurd-i386
Source: perl
Version: 5.8.4-5
Replaces: perl-5.005-base (<< 6), perl-5.6-base (<< 6), perl (<< 5.8.0-9), perl-modules (<< 5.8.4-5), libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libclass-multimethods-perl (<< 1.70-4)
Provides: perl5-base, perlapi-5.8.0, perlapi-5.8.1, perlapi-5.8.2, perlapi-5.8.3, perlapi-5.8.4, data-dumper, libscalar-list-utils-perl
Pre-Depends: hurd, libc0.3 (>= 2.3.2.ds1-4)
Suggests: perl
Conflicts: perl-5.004-base (<< 6), perl-5.005-base (<< 6), perl-5.6-base (<< 6), data-dumper, autoconf2.13 (<< 2.13-45), libscalar-list-utils-perl (<< 1:1.13-1)
Description: The Pathologically Eclectic Rubbish Lister
 A scripting language with delusions of full language-hood, Perl is used
 in many system scripts and utilities.
 .
 This is a stripped down Perl with only essential libraries.  To make
 full use of Perl, you'll want to install the `perl', `perl-modules' and
 optionally `perl-doc' packages which supplement this one.

Package: sysv-rc
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 192
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: all
Source: sysvinit
Version: 2.86.ds1-1
Replaces: dpkg (<< 1.9.17), sysvinit (<< 2.85-1), file-rc (>> 0.7.0)
Suggests: sysv-rc-conf
Conflicts: file-rc
Description: Standard boot mechanism using symlinks in /etc/rc?.d
 This package provides support for the System-V like system of booting,
 shutting down and changing runlevels configured through symbolic
 links in the /etc/rc?.d directories.

Package: apt
Status: install ok unpacked
Priority: important
Section: base
Installed-Size: 3664
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: hurd-i386
Version: 0.5.28.6
Replaces: libapt-pkg-doc (<< 0.3.7), libapt-pkg-dev (<< 0.3.7)
Provides: libapt-pkg-libc6.3-5-3.3
Depends: libc0.3 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.4.1-3), libstdc++5 (>= 1:3.3.4-1)
Suggests: aptitude | synaptic | gnome-apt | wajig, dpkg-dev, apt-doc
Description: Advanced front-end for dpkg
 This is Debian's next generation front-end for the dpkg package manager.
 It provides the apt-get utility and APT dselect method that provides a
 simpler, safer way to install and upgrade packages.
 .
 APT features complete installation ordering, multiple source capability
 and several other unique features, see the Users Guide in apt-doc.

Package: libgdbmg1
Status: install ok unpacked
Priority: extra
Section: oldlibs
Installed-Size: 64
Maintainer: James Troup <james@nocrew.org>
Architecture: hurd-i386
Source: gdbm173
Version: 1.7.3-28
Provides: elf-libgdbm
Depends: libc0.3 (>= 2.3.1-1)
Conflicts: libgdbm1 (<< 1.7.3-20)
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).

Package: netbase
Status: install ok unpacked
Priority: important
Section: base
Installed-Size: 184
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: all
Version: 4.21
Depends: ifupdown (>= 0.6.4-4.9), netkit-inetd, tcpd, iputils-ping | ping, debconf
Conflicts: xinetd (<= 2.2.1-8), netstd (<< 3.00), nfs-common (<< 1:0.3.2-1), nfs-user-server (<< 2.2beta47-9), nis (<= 3.6-2), rstatd (<= 3.03-3), rwalld (<= 0.16-1), rusersd (<= 0.17-1), ugidd (<< 2.2beta47-9)
Conffiles:
 /etc/protocols newconffile
 /etc/init.d/networking newconffile
 /etc/services newconffile
 /etc/rpc newconffile
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: libpam-modules
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 472
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: hurd-i386
Source: pam
Version: 0.76-22
Replaces: libpam0g-util
Provides: libpam-motd, libpam-mkhomedir
Depends: libc0.3 (>= 2.3.2.ds1-4), libdb3 (>= 3.2.9-20), libpam0g (>= 0.76)
Conflicts: libpam0g-modules (= 0.66-1), libpam-motd, libpam-mkhomedir, suidmanager (<< 0.50)
Conffiles:
 /etc/security/access.conf newconffile
 /etc/security/group.conf newconffile
 /etc/security/pam_env.conf newconffile
 /etc/security/time.conf newconffile
 /etc/security/access.conf newconffile
 /etc/security/pam_env.conf newconffile
 /etc/security/group.conf newconffile
 /etc/security/limits.conf newconffile
 /etc/security/time.conf newconffile
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix_*.so module as well as some specialty modules.

Package: ifupdown
Status: install ok unpacked
Priority: important
Section: net
Installed-Size: 240
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: hurd-i386
Version: 0.6.4-4.10+gnu.1
Replaces: netbase (<< 4.00)
Depends: libc0.3 (>= 2.3.2.ds1-4), debconf (>= 0.5) | debconf-2.0
Suggests: iproute, dhcp3-client | dhcp-client, ppp
Conflicts: dhcp-client (= 3.0.1betaRC4-1)
Conffiles:
 /etc/init.d/ifupdown newconffile
 /etc/init.d/ifupdown-clean newconffile
 /etc/default/ifupdown newconffile
Description: High level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: debconf-english
Status: install ok unpacked
Priority: extra
Section: admin
Installed-Size: 20
Maintainer: Joey Hess <joeyh@debian.org>
Architecture: all
Source: debconf
Version: 1.4.49
Depends: debconf
Conflicts: debconf-i18n
Description: small footprint English-only debconf
 This package is an alternative to the debconf-i18n package, intended for
 systems that are administered only in English, and low-footprint systems.
 If you install this package, debconf will not work properly in other
 languages, but you'll save half a megabyte of disk space.

Package: shellutils
Status: install ok unpacked
Priority: extra
Section: oldlibs
Installed-Size: 16
Maintainer: Michael Stone <mstone@debian.org>
Architecture: all
Source: coreutils
Version: 5.2.1-2
Pre-Depends: coreutils
Description: The GNU shell programming utilities (transitional package)
 Empty package to facilitate upgrades, can be safely removed.

Package: tar
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 1416
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: hurd-i386
Version: 1.14-2
Replaces: cpio
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4)
Suggests: bzip2
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt newconffile
Description: GNU tar
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: zlib1g
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 152
Maintainer: Mark Brown <broonie@debian.org>
Architecture: hurd-i386
Source: zlib
Version: 1:1.2.2-4
Replaces: zlib1g-udeb
Provides: libz1
Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: zlib1 (<= 1:1.0.4-7), zlib1g-udeb
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.

Package: adduser
Status: install ok unpacked
Priority: important
Section: base
Installed-Size: 628
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Version: 3.63
Depends: perl-base (>= 5.6.0), passwd (>= 961025), debconf
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf newconffile
Description: Add and remove users and groups
 This package includes the adduser and deluser commands for creating
 and removing users.
 .
 o Adduser can create new users and groups and add existing users to
   existing groups.
 o Deluser can remove users and groups and remove users from a given
   group.
 .
 Adding users with adduser is much easier than adding them by hand.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, allow you to set an
 initial password and the GECOS field.
 .
 Deluser can optionally remove and backup the user's home directory
 and mail spool or all files on the system owned by him.
 .
 Optionally a custom script can be executed after each of the commands.
 .
 Adduser is maintained on http://alioth.debian.org/projects/adduser/.
 There is also a development mailing list on
 http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/.

Package: slang1a-utf8
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 564
Maintainer: Jim Mintha <jmintha@debian.org>
Architecture: hurd-i386
Source: slang
Version: 1.4.9dbs-8
Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: slang1-utf8
Description: The S-Lang programming library with utf8 support
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
 This packages has wide character support.

Package: ed
Status: install ok unpacked
Priority: important
Section: editors
Installed-Size: 144
Maintainer: James Troup <james@nocrew.org>
Architecture: hurd-i386
Version: 0.2-20
Depends: libc0.3 (>= 2.3.1-1)
Description: The classic unix line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.

Package: libgcc1
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 148
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: hurd-i386
Source: gcc-3.4 (3.4.1ds1-7)
Version: 1:3.4.1-7
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: grub
Status: install ok unpacked
Priority: optional
Section: admin
Installed-Size: 704
Maintainer: Grub Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: hurd-i386
Version: 0.95+cvs20040624-17
Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Suggests: grub-doc, grubconf
Description: GRand Unified Bootloader
 GRUB is a GPLed bootloader intended to unify bootloading across x86
 operating systems.  In addition to loading the Linux kernel,
 it implements the Multiboot standard, which allows for flexible loading
 of multiple boot images (needed for modular kernels such as the GNU Hurd).

Package: base-files
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 360
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: hurd-i386
Version: 3.1.2
Replaces: base, miscutils
Provides: base
Depends: awk, base-passwd (>= 2.0.3.4)
Conffiles:
 /etc/debian_version newconffile
 /etc/host.conf newconffile
 /etc/issue newconffile
 /etc/issue.net newconffile
 /etc/nsswitch.conf newconffile
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.

Package: libtext-iconv-perl
Status: install ok unpacked
Priority: important
Section: text
Installed-Size: 96
Maintainer: Steve Haslam <araqnid@debian.org>
Architecture: hurd-i386
Version: 1.2-3
Depends: libc0.3 (>= 2.3.1-1), perl-base (>= 5.8.3-2), perlapi-5.8.3
Description: Convert between character sets in Perl
 The iconv() family of functions from XPG4 define an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6
 .
 This package allows access to them from Perl via the Text::Iconv
 package.

Package: gnumach
Status: install ok unpacked
Priority: optional
Section: base
Installed-Size: 996
Maintainer: GNU Hurd Maintainers <debian-hurd@lists.debian.org>
Architecture: hurd-i386
Version: 1:20050501-1
Description: The GNU version of the Mach microkernel
 This is the Utah Mach microkernel used by the Hurd.

Package: libreadline4
Status: install ok unpacked
Priority: standard
Section: libs
Installed-Size: 332
Maintainer: Matthias Klose <doko@debian.org>
Architecture: hurd-i386
Source: readline4
Version: 4.3-15
Replaces: libreadline4-dev (<< 2.5a), libreadline-common
Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Conflicts: libreadline4-dev (<< 2.5a), libreadline-common
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libncurses5
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 512
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Architecture: hurd-i386
Source: ncurses
Version: 5.4-4
Depends: libc0.3 (>= 2.3.1-1)
Description: Shared libraries for terminal handling
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.

Package: patch
Status: install ok unpacked
Priority: standard
Section: utils
Installed-Size: 188
Maintainer: Michael Fedrowitz <michaelf@debian.org>
Architecture: hurd-i386
Version: 2.5.9-2
Depends: libc0.3 (>= 2.3.2.ds1-4)
Suggests: ed
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.

Package: textutils
Status: install ok unpacked
Priority: extra
Section: oldlibs
Installed-Size: 16
Maintainer: Michael Stone <mstone@debian.org>
Architecture: all
Source: coreutils
Version: 5.2.1-2
Pre-Depends: coreutils
Description: The GNU text file processing utilities (transitional package)
 Empty package to facilitate upgrades, can be safely removed.

Package: sed
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 876
Maintainer: Clint Adams <schizo@debian.org>
Architecture: hurd-i386
Version: 4.1.4-2
Replaces: ssed (<< 3.59)
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: libperl5.8
Status: install ok unpacked
Priority: optional
Section: libs
Installed-Size: 1184
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: hurd-i386
Source: perl
Version: 5.8.4-5
Depends: hurd, libc0.3 (>= 2.3.2.ds1-4), perl-base (= 5.8.4-5)
Conflicts: libapache-mod-perl (<< 1.29.0.1-3)
Description: Shared Perl library
 This package is required by programs which embed a Perl interpreter to
 ensure that the correct version of `perl-base' is installed.  It
 additionally contains the shared Perl library on architectures where the
 perl binary is linked to libperl.a (currently only i386, for performance
 reasons).  In other cases the actual library is in the `perl-base' package.

Package: e2fslibs
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 188
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hurd-i386
Source: e2fsprogs
Version: 1.37-2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libext2fs2, libe2p2
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: ext2 filesystem libraries
 The ext2fs and e2p libraries are used by programs that directly access
 EXT2 filesystems from usermode programs.   The EXT2 filesystem is very often
 used as the default filesystem on Linux systems.   Various system programs
 that use libext2fs include e2fsck, mke2fs, tune2fs, etc.  Programs that use
 libe2p include dumpe2fs, chattr, and lsattr.

Package: inetutils-syslogd
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 168
Maintainer: Jeff Bailey <jbailey@nisa.net>
Architecture: hurd-i386
Source: inetutils
Version: 2:1.4.2+20040207-4
Replaces: syslogd
Provides: system-log-daemon
Depends: libc0.3 (>= 2.3.2.ds1-4), zlib1g (>= 1:1.2.1), netbase
Conflicts: system-log-daemon
Conffiles:
 /etc/init.d/inetutils-syslogd newconffile
 /etc/logrotate.d/inetutils-syslogd newconffile
 /etc/syslog.conf newconffile
Description: System logging daemon
 The syslog daemon is responsible for providing logging of messages
 received from programs and facilities on the local host as well as
 from remote hosts.

Package: inetutils-telnet
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 168
Maintainer: Jeff Bailey <jbailey@nisa.net>
Architecture: hurd-i386
Source: inetutils
Version: 2:1.4.2+20040207-4
Replaces: telnet-hurd
Provides: telnet-client
Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), zlib1g (>= 1:1.2.1), netbase
Description: Telnet client
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.

Package: base-passwd
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 136
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: hurd-i386
Version: 3.5.9
Replaces: base
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libc0.3
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 13988
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: hurd-i386
Source: glibc
Version: 2.3.2.ds1-20.0.1
Replaces: glibc2, ldso (<= 1.9.11-9), timezone, timezones, gconv-modules, libtricks, netkit-rpc, netbase (<< 4.0), libc0.3-dev (<< 2.3.2.ds1-14)
Provides: glibc-2.3.2.ds1-20
Depends: hurd (>= 20010718-1)
Suggests: glibc-doc
Conflicts: glibc2, strace (<< 4.0-0), libnss-db (<= 2.2-6.1.1), timezone, timezones, gconv-modules, libtricks, libc0.3-doc, netkit-rpc, wine (<< 0.0.20031118-1), cyrus-imapd (<< 1.5.19-15)
Description: GNU C Library: Shared libraries and Timezone data
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 Timezone data is also included.

Package: libcomerr2
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 76
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hurd-i386
Source: e2fsprogs
Version: 1.37-2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.

Package: mawk
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 220
Maintainer: James Troup <james@nocrew.org>
Architecture: hurd-i386
Version: 1.3.3-11
Provides: awk
Pre-Depends: libc0.3 (>= 2.3.1-1)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: groff-base
Status: install ok unpacked
Priority: important
Section: text
Installed-Size: 2500
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: hurd-i386
Source: groff
Version: 1.18.1.1-7
Replaces: groff (<< 1.17.2-17), jgroff (<< 1.17-1)
Depends: libc0.3 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.4.1-3), libstdc++5 (>= 1:3.3.4-1)
Suggests: groff
Conflicts: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
 /etc/groff/man.local newconffile
 /etc/groff/mdoc.local newconffile
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.

Package: libdb4.2
Status: install ok unpacked
Priority: standard
Section: libs
Installed-Size: 908
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Architecture: hurd-i386
Source: db4.2
Version: 4.2.52-18
Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v4.2 Database Libraries [runtime]
 This is the runtime package for programs that use the v4.2 Berkeley
 database library.

Package: grep
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 660
Maintainer: Ryan M. Golbeck <rmgolbeck@debian.org>
Architecture: hurd-i386
Version: 2.5.1.ds1-4
Provides: rgrep
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: passwd
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 1740
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: hurd-i386
Source: shadow
Version: 1:4.0.3-31sarge3
Replaces: manpages (<= 1.15-2), manpages-de (<= 0.4-4), manpages-fr, manpages-hu, manpages-it, manpages-ja, manpages-ko, manpages-pl (<= 20020406-1)
Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: shadow-passwd, pam-apps, suidregister (<< 0.50), debconf (<< 0.5)
Conffiles:
 /etc/pam.d/chfn newconffile
 /etc/pam.d/chsh newconffile
 /etc/pam.d/passwd newconffile
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian

Package: hostname
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 76
Maintainer: Graham Wilson <graham@debian.org>
Architecture: hurd-i386
Version: 2.13
Pre-Depends: libc0.3 (>= 2.3.1-1)
Description: A utility to set/show the host name or domain name
 The hostname command can be used to either set or display
 the current host or domain name of the system. This name is
 used by many of the networking programs to identify the machine.
 The domain name is also used by NIS/YP.

Package: libpam-runtime
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 180
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: all
Source: pam
Version: 0.76-22
Replaces: libpam0g-util, libpam0g-dev
Conflicts: libpam0g-util, libpam0g (<< 0.66-0)
Conffiles:
 /etc/pam.conf newconffile
 /etc/pam.d/other newconffile
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.

Package: inetutils-ping
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 108
Maintainer: Jeff Bailey <jbailey@nisa.net>
Architecture: hurd-i386
Source: inetutils
Version: 2:1.4.2+20040207-4
Provides: ping
Depends: libc0.3 (>= 2.3.2.ds1-4), zlib1g (>= 1:1.2.1), netbase
Conflicts: ping, hurd (<= 20010718-1)
Description: ICMP ECHO tool
 Ping (The Packet InterNet Gropper) uses ICMP to send out echo requests,
 and uses the reply packets to calculate latency between the sending and
 the destination hosts.

Package: initscripts
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 240
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: hurd-i386
Source: sysvinit
Version: 2.86.ds1-1
Replaces: sysvinit (<< 2.85-12), libc6, libc6.1, libc0.1, libc0.3
Depends: libc0.3 (>= 2.3.2.ds1-4), libc0.3 (>= 2.3.2.ds1-12), dpkg (>= 1.9.0), util-linux (>= 2.9t-2), e2fsprogs (>= 1.19-1), coreutils (>= 5.0.91-2)
Conflicts: kbd (<< 0.95-2), mdutils (<< 0.35-9)
Conffiles:
 /etc/init.d/bootclean.sh newconffile
 /etc/init.d/bootlogd newconffile
 /etc/init.d/bootmisc.sh newconffile
 /etc/init.d/checkfs.sh newconffile
 /etc/init.d/checkroot.sh newconffile
 /etc/init.d/halt newconffile
 /etc/init.d/hostname.sh newconffile
 /etc/init.d/mountall.sh newconffile
 /etc/init.d/mountnfs.sh newconffile
 /etc/init.d/mountvirtfs newconffile
 /etc/init.d/reboot newconffile
 /etc/init.d/rmnologin newconffile
 /etc/init.d/sendsigs newconffile
 /etc/init.d/single newconffile
 /etc/init.d/umountfs newconffile
 /etc/init.d/umountnfs.sh newconffile
 /etc/init.d/urandom newconffile
 /etc/default/bootlogd newconffile
 /etc/default/devpts newconffile
 /etc/default/halt newconffile
 /etc/default/tmpfs newconffile
Description: Standard scripts needed for booting and shutting down
 These scripts are meant for standard Debian/GNU/Linux installations.

Package: libblkid1
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 120
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hurd-i386
Source: e2fsprogs
Version: 1.37-2
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: libss2
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 88
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hurd-i386
Source: e2fsprogs
Version: 1.37-2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2
Description: command-line interface parsing library
 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 .
 It was originally inspired by the Multics SubSystem library.

Package: findutils
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 608
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: hurd-i386
Version: 4.1.20-6
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4)
Conffiles:
 /etc/cron.daily/find newconffile
 /etc/updatedb.conf newconffile
Description: utilities for finding files--find, xargs, and locate
 These utilities find files meeting specified criteria and perform
 various actions on the files which are found.

Package: e2fsprogs
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 1364
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hurd-i386
Version: 1.37-2
Replaces: hurd (<= 20040301-1)
Pre-Depends: e2fslibs (= 1.37-2), libblkid1 (>= 1.34-1), libc0.3 (>= 2.3.2.ds1-4), libcomerr2 (>= 1.34-1), libss2 (>= 1.34-1), libuuid1 (>= 1.34-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4)
Description: ext2 file system utilities and libraries
 EXT2 stands for "Extended Filesystem", version 2. It's the main
 filesystem type used for hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining EXT2
 filesystems, and the generic `fsck' wrapper.

Package: gzip
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 232
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: hurd-i386
Version: 1.3.5-9
Depends: debianutils (>= 1.6)
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4)
Suggests: less
Description: The GNU compression utility
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: dpkg
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 3872
Origin: debian
Maintainer: Dpkg Development <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: hurd-i386
Version: 1.10.23
Replaces: dpkg-doc-ja, dpkg-static, manpages-de (<= 0.4-3)
Pre-Depends: dselect, hurd, libc0.3 (>= 2.3.2.ds1-4)
Conflicts: sysvinit (<< 2.82-1), dpkg-iasearch (<< 0.11), dpkg-static, dpkg-dev (<< 1.10)
Conffiles:
 /etc/dpkg/origins/debian newconffile
 /etc/alternatives/README newconffile
Description: Package maintenance system for Debian
 This package contains the programs which handle the installation and
 removal of packages on your system.
 .
 The primary interface for the dpkg suite is the `dselect' program;
 a more low-level and less user-friendly interface is available in
 the form of the `dpkg' command.
 .
 In order to unpack and build Debian source packages you will need to
 install the developers' package `dpkg-dev' as well as this one.

Package: libncursesw5
Status: install ok unpacked
Priority: standard
Section: libs
Installed-Size: 532
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Architecture: hurd-i386
Source: ncurses
Version: 5.4-4
Depends: libc0.3 (>= 2.3.1-1)
Description: Shared libraries for terminal handling (wide character support)
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.

Package: liblocale-gettext-perl
Status: install ok unpacked
Priority: important
Section: perl
Installed-Size: 108
Maintainer: Raphael Hertzog <hertzog@debian.org>
Architecture: hurd-i386
Version: 1.04-1
Depends: libc0.3 (>= 2.3.2.ds1-4), perl-base (>= 5.8.4-5), perlapi-5.8.4
Pre-Depends: perl-base (>= 5.8)
Description: Using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().

Package: hurd
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 5284
Maintainer: GNU Hurd Maintainers <debian-hurd@lists.debian.org>
Architecture: hurd-i386
Version: 20050507-1
Replaces: makedev, login
Provides: makedev, login
Depends: sysv-rc, libc0.3 (>= 2.3.2.ds1-4), libncursesw5 (>= 5.4-1)
Suggests: hurd-doc
Conflicts: makedev, login
Conffiles:
 /etc/login/.bash_login newconffile
 /etc/login/.bashrc newconffile
 /etc/login/.hushlogin newconffile
 /etc/login/.profile newconffile
 /etc/login/README newconffile
 /etc/ttys newconffile
Description: The GNU Hurd
 This is the GNU Hurd package. It contains essential system software and
 libraries.

Package: dialog
Status: install ok unpacked
Priority: optional
Section: misc
Installed-Size: 1060
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: hurd-i386
Version: 1.0-20050306-1
Depends: libc0.3 (>= 2.3.2.ds1-4), libncursesw5 (>= 5.4-1), debianutils (>= 1.6)
Description: Displays user-friendly dialog boxes from shell scripts
 This application provides a method of displaying several different types
 of dialog boxes from shell scripts.  This allows a developer of a script
 to interact with the user in a much friendlier manner.
 .
 The following types of boxes are at your disposal:
  yes/no           Typical query style box with "Yes" and "No" answer buttons
  menu             A scrolling list of menu choices with single entry selection
  input            Query style box with text entry field
  message          Similar to the yes/no box, but with only an "Ok" button
  text             A scrollable text box that works like a simple file viewer
  info             A message display that allows asynchronous script execution
  checklist        Similar to the menu box, but allowing multiple selections
  radiolist        Checklist style box allowing single selections
  gauge            Typical "progress report" style box
  tail             Allows viewing the end of files (tail) that auto updates
  background tail  Similar to tail but runs in the background.

Package: diff
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 744
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: hurd-i386
Source: diffutils
Version: 2.8.1-11
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4)
Suggests: diff-doc
Description: File comparison utilities
 The diff package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: perl
Status: install ok unpacked
Priority: standard
Section: perl
Installed-Size: 10628
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: hurd-i386
Version: 5.8.4-5
Replaces: perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1), libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl
Provides: perl5, libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl
Depends: perl-base (= 5.8.4-5), perl-modules (>= 5.8.4-5), hurd, libc0.3 (>= 2.3.2.ds1-4), libdb4.2, libgdbm3
Suggests: perl-doc, libterm-readline-perl-perl
Conflicts: perl-5.004 (<< 6), perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.4-1), libdigest-md5-perl (<< 2.33-1), libmime-base64-perl (<< 3.04-1), libtime-hires-perl (<< 1.59-1), libstorable-perl (<< 2.12-1)
Description: Larry Wall's Practical Extraction and Report Language
 An interpreted scripting language, known among some as "Unix's Swiss
 Army Chainsaw".
 .
 Perl is optimised for scanning arbitrary text files and system
 administration.  It has built-in extended regular expression matching
 and replacement, a data-flow mechanism to improve security with
 setuid scripts and is extensible via modules that can interface to C
 libraries.

Package: libdb3
Status: install ok unpacked
Priority: required
Section: libs
Installed-Size: 600
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Architecture: hurd-i386
Source: db3
Version: 3.2.9-22
Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v3 Database Libraries [runtime]
 This is the runtime package for programs that use the Berkeley v3
 database library.
 .
 Many programs use the Berkeley Database to store their data. Other
 versions of the database can be found in the db2, db4.0, db4.1 and
 db4.2 packages.

Package: dselect
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 460
Origin: debian
Maintainer: Dpkg Development <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: hurd-i386
Source: dpkg
Version: 1.10.23
Replaces: dpkg (<< 1.10.3)
Depends: libc0.3 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.4-1), libncurses5 (>= 5.4-1)
Conffiles:
 /etc/dpkg/dselect.cfg newconffile
Description: a user tool to manage Debian packages
 dselect is the primary user interface for installing, removing and
 managing Debian packages. It is a front-end to dpkg.

Package: nano
Status: install ok unpacked
Priority: important
Section: editors
Installed-Size: 1292
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: hurd-i386
Version: 1.2.4-5
Replaces: pico
Provides: editor
Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Suggests: spell
Conflicts: nano-tiny (<= 1.0.0-1), pico
Conffiles:
 /etc/nanorc newconffile
Description: free Pico clone with some new features
 GNU nano is a free replacement for Pico, the default Pine editor. Pine is
 copyrighted under a restrictive licence, that makes it unsuitable for
 Debian's main section. GNU nano is an effort to provide a Pico-like
 editor, but also includes some features that were missing in the original,
 such as 'search and replace', 'goto line' or internationalization support.

Package: gcc-3.3-base
Status: install ok unpacked
Priority: required
Section: devel
Installed-Size: 204
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: hurd-i386
Source: gcc-3.3
Version: 1:3.3.5-12
Description: The GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).

Package: apt-utils
Status: install ok unpacked
Priority: optional
Section: admin
Installed-Size: 488
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: hurd-i386
Source: apt
Version: 0.5.28.6
Replaces: apt (<< 0.5.9)
Provides: libapt-inst-libc6.3-5-1.0
Depends: libapt-pkg-libc6.3-5-3.3, libc0.3 (>= 2.3.2.ds1-4), libdb4.2, libgcc1 (>= 1:3.4.1-3), libstdc++5 (>= 1:3.3.4-1)
Description: APT utility programs
 This package contains some APT utility programs such as apt-ftparchive,
 apt-sortpkgs and apt-extracttemplates.
 .
 apt-extracttemplates is used by debconf to prompt for configuration
 questions before installation. apt-ftparchive is used to create Package
 and other index files. apt-sortpkgs is a Package/Source file normalizer.

Package: bash
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 1644
Maintainer: Matthias Klose <doko@debian.org>
Architecture: hurd-i386
Version: 3.0-14
Replaces: bash-doc (<= 2.05-1), bash-completion
Depends: base-files (>= 2.1.12), passwd (>= 1:4.0.3-10)
Pre-Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Suggests: bash-doc
Conflicts: bash-completion
Conffiles:
 /etc/skel/.bashrc newconffile
 /etc/skel/.bash_profile newconffile
 /etc/bash.bashrc newconffile
 /etc/bash_completion newconffile
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 Included in the bash package is the Programmable Completion Code, by
 Ian Macdonald.

Package: make
Status: install ok unpacked
Priority: standard
Section: devel
Installed-Size: 1076
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: hurd-i386
Version: 3.80-9
Depends: libc0.3 (>= 2.3.2.ds1-4)
Description: The GNU version of the "make" utility.
 GNU Make is a program that determines which pieces of a large
 program need to be recompiled and issues the commands to recompile
 them, when necessary. More information about GNU Make can be
 found in the `make' Info page. The upstream sources for this package
 are available at the location ftp://ftp.gnu.org/gnu/make/

Package: util-linux
Essential: yes
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 708
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: hurd-i386
Version: 2.12-3
Replaces: miscutils, setterm, fdisk, getty
Pre-Depends: libc0.3 (>= 2.3.1-1), libncurses5 (>= 5.3.20030510-1), slang1a-utf8 (>> 1.4.4-7.1), zlib1g (>= 1:1.1.4)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: setterm, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21), getty
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: cpio
Status: install ok unpacked
Priority: important
Section: utils
Installed-Size: 176
Maintainer: Brian Mays <brian@debian.org>
Architecture: hurd-i386
Version: 2.5-1.2
Replaces: cpio-mt
Depends: libc0.3 (>= 2.3.2.ds1-4)
Conflicts: mt-st (<< 0.6), cpio-mt
Description: GNU cpio -- a program to manage archives of files.
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.

Package: libstdc++5
Status: install ok unpacked
Priority: required
Section: base
Installed-Size: 844
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: hurd-i386
Source: gcc-3.3
Version: 1:3.3.5-12
Depends: gcc-3.3-base (>= 1:3.3.5-12), libc0.3 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.4-3)
Description: The GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: binutils
Status: install ok unpacked
Priority: standard
Section: devel
Installed-Size: 5528
Maintainer: James Troup <james@nocrew.org>
Architecture: hurd-i386
Version: 2.15-5
Provides: elf-binutils
Depends: libc0.3 (>= 2.3.2.ds1-4)
Suggests: binutils-doc (= 2.15-5)
Conflicts: gas, elf-binutils, modutils (<< 2.4.19-1)
Description: The GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.

Package: less
Status: install ok unpacked
Priority: standard
Section: text
Installed-Size: 256
Maintainer: Thomas Schoepf <schoepf@debian.org>
Architecture: hurd-i386
Version: 382-2
Depends: libc0.3 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), debianutils (>= 1.8)
Description: Pager program similar to more
 Less is a program similar to more(1), but which allows backward
 movement in the file as well as forward movement.  Also, less does not
 have to read the entire input file before starting, so with large input
 files it starts up faster than text editors like vi(1).  Less uses
 termcap (or terminfo on some systems), so it can run on a variety of
 terminals.  There is even limited support for hardcopy terminals.
 .
 Homepage: http://www.greenwoodsoftware.com/less/

Package: libtext-charwidth-perl
Status: install ok unpacked
Priority: important
Section: perl
Installed-Size: 96
Maintainer: Tomohiro KUBOTA <kubota@debian.org>
Architecture: hurd-i386
Version: 0.04-1
Depends: libc0.3 (>= 2.3.1-1), perl-base (>= 5.8.3-2), perlapi-5.8.3
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().

Package: libwrap0
Status: install ok unpacked
Priority: important
Section: base
Installed-Size: 84
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: hurd-i386
Source: tcp-wrappers
Version: 7.6.dbs-8
Depends: libc0.3 (>= 2.3.2.ds1-4)
Recommends: tcpd
Conflicts: netbase (<< 3.16-1)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

